 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| CNC Users |
| Download Config Software and Instruction HERE |
For 2015-2016 releases
CNC Users, Staging Centers.
Requires MicroSoft .NET4.5: Win 7, 8, etc.
XP is not supported for Programming the keypad.
However, once configured it will operate as a keyboard on most any OS
including XP
CNC Users, Staging Centers.
Requires MicroSoft .NET4.5: Win 7, 8, etc.
XP is not supported for Programming the keypad.
However, once configured it will operate as a keyboard on most any OS
including XP
| v2.0.3.0 |
Videos on how to Program the Keypad
PDF Inserts to print and cutout
CAMaster 30 v1
Make your own custom Inserts
KRS Config files 20 &30 Button
MACH 3 setup - written by a Mach 3 user
Note: You cannot make a 20 button keypad a 30 button; nor can you remotely change the firmware of a 20 button keypad
to support the new featuers of the current firmware.
To get your keypad upgraded to the new features including up to 62 characters per key. Email support@krscorporation.com and
for a minimal fee, your USB keypad can be updated to Version 3 firmware. This can only be done at our factory.
to support the new featuers of the current firmware.
To get your keypad upgraded to the new features including up to 62 characters per key. Email support@krscorporation.com and
for a minimal fee, your USB keypad can be updated to Version 3 firmware. This can only be done at our factory.
- New Ver 5 Firmware: for both 20 & 30 Button keypads
- Up to 62 Characters per Button
- Fixed USB or PS/2 selectable
- Auto USB or PS/2
- and more...
2017 Firmware for older 20 Button
USB Keypads with Ver. 3.x.x firmware
WARNING: Cancer and Reproductive
Harm - www.P65Warnings.ca.gov.
Harm - www.P65Warnings.ca.gov.
